VIBRO EP METAL
Vibro-EP Metal consists of an elastic element (dimensions 12.5×12.5 cm) and a specially formed galvanized metal cover. The intercession of the steel covers between the base of the machine and the elastic, this ensures that the equable distribution of the load to the entire surface of the elastic element. At the same time, the cover protects the rubber from the solar radiation. At the center of the upper side of the cover, an internal M12 thread is incorporated, which accepts the corresponding fixing screw (not included). The beige, green and yellow elastic pads are made of Neoprene type of rubber.
Why Vibro-EP metal | Antivibration Elastic Pads with Metal Cover:
- It is Easy to Install
- Can be used for Antivibration Machinery Support
- Can be used for Machinery Fixing
ANTIVIBRATION SUPPORTS: Air-compressors – Cutting machines – Printing machines – Fans – Air conditioner units etc.
Elastic Element dimensions: 12.5×12.5×2.5 cm
Total height: 2.8 cm
Internal thread: M12
VIBRO-EP rubber vibration isolation pads (standalone) is the heart of the Vibro-EP Metal. It is the result of specialized research and produced in this form since 1989, made from first-rate elastomeric material mixed with special substances for its further improvement.
Its longitudinal holes increase the provided compression and improve vibration absorption.
Multiple VIBRO-EP rubber vibration isolators can be used in layers to form the Vibro-EP Complex. Then with the use of steel plate in between we can achieve a reduction of the natural frequency down to 4 Hz.